Configure an Application Group PolicyNEW!

Use this procedure to create, edit, or delete an Application Group policy.

  1. Go to Policies > Application Group.
  2. Choose from the following actions:
    • Select to create a new Application Group policy.
      1. Enter a Name (up to 32 characters) for the policy. Ensure that the name uniquely differentiates this policy from existing Application Group policies.
      2. Select Add to create the policy.
      3. Proceed to the next step.
    • From under the Actions column:
      • Select associated with a policy and modify it in accordance with the steps in this procedure.
      • Select associated with a policy to delete it.
  3. Configure the parameters under the Details tab as described in Application Group Policy Parameters.
    Table 1. Application Group Policy Parameters
    Parameter Description
    Description Enter a description (up to 80 characters) for the policy.
    Applications

    This field lists all available applications, including those that are system-provided and user-defined. The WiNG software has over 300 built-in applications. You can configure custom applications using the CLI command application.

    You can add up to 8 applications to a policy. Select applications using either of the following methods:

    • Scroll through the list and select the check box adjacent to individual applications to add them to the policy.
    • Enter an application name in the search field to narrow the list. For example, enter amazon to narrow the list to strictly amazon related applications. Then, scroll through the list and select individual applications, or select the checkbox adjacent to the search field to select all the applications.
  4. After you have completed configuring the settings, choose from the following actions:
    1. Select Revert to restore default settings or restore the last saved settings.
      Note

      Note

      You cannot restore default settings after applying or saving changes.
    2. Select Apply to commit the configured settings.
      Note

      Note

      This does not permanently save the settings you configured. If you perform a Reload (warm reboot), applied settings will be lost.
    3. Select Save to commit and save the configured settings.
      Note

      Note

      If you do not select Apply or Save, the settings that you configured are not saved when you move away from the configuration window.

9037761-05 Rev AA